Water-Based High-Temperature Glass Ink for Shower Enclosures

Divided into two major systems: two-component oven high-temperature baking type and single-component tempered sintering type, it completely replaces traditional oil-based stone texture glass ink. It has low VOC and low odor, and the screen and squeegee can be cleaned with water. It is suitable for mass screen printing on architectural decorative glass, furniture tabletop glass, refrigerator/wine cabinet decorative glass, and bathroom partition glass, taking into account both the visual effect of simulated stone texture and industrial-grade weather resistance and durability.

When the high-end kitchen panel needs to reproduce the touch of natural rock plate, and when the glass of disinfection cabinet still needs to maintain three-dimensional texture under high temperature steam, the texture ambiguity and chemical corrosion of traditional ink are becoming the quality bottleneck. This Kitchen Tempered Glass Ink, with nano-scale layered printing technology and military-grade chemical resistance, is setting off a decoration revolution in the global smart home appliances and home furnishing industry.

Three Core Technologies-Double Breakthrough of Touch and Performance

Texture Reconstruction of Bionic Rock Plate —— "Micron-scale Reproduction" of 0.05 mm

Multilayer superposition technology:

• The thickness of single-layer printing is 3-8μm, and the tactile sensation after stacking 5 layers is comparable to that of real rock plate (roughness Rz=15-50μm).

• Three textures of matte/metallic glaze/sandstone are supported, and the color difference Δ E < 0.5 (indistinguishable by naked eyes).

• Actual combat data: a luxury cabinet brand has measured that the texture depth retention rate is more than 97% after 10 years of use.

Chemical-resistant "molecular armor"-the ultimate answer to extreme kitchen environment

Chemical challenge:

• Soak in 5% hydrochloric acid for 15 minutes: the change of surface gloss is less than 1.5% (ASTM D523).

• 84 Disinfection solution (diluted at 1:50) washed for 30 minutes: adhesion ≥4B(ASTM D3359).

Thermal shock protection:

• Tempering temperature 680-720℃, thermal expansion coefficient difference ≤ 0.2× 10/℃

• The glass of disinfection cabinet has undergone 10000 cycles of sudden change of steam at room temperature at 100℃ without cracks.

• Industrial mass production adaptation-balance between decoration and efficiency 

Perfect match for Silkscreen Printers For Glass:

• The ink permeability of 150-350 Screen Printing Mesh is more than 99.3%, and the production capacity per hour is 600 pieces (800mm×500mm standard board).

• The hardness of scraper is 60-85T, and the film thickness difference is ±0.5μm m.

• Drying revolution: low temperature curing at 150-180℃/5-10min, reducing energy consumption by 45%.

Four Scenes of Omnipotent Conquest —— Silent Testimony of Quality

Intelligent kitchen

German high-end integrated stove panel:

• The test of resistance to carbonization of edible oil (300℃/2h) shortens the cleaning time by 70%.

• The touch area can resist fingerprint rubbing for 100,000 times, and the resistance value fluctuation is less than 0.3%.

▍ Medical disinfection equipment

Glass of disinfection cabinet in 3A hospital:

• Resistant to hydrogen peroxide fumigation (concentration 6%) for 3 years and zero corrosion.

• The antibacterial coating passed ISO 22196 standard (antibacterial rate > 99.9%).

▍ Home table top

Italian slate textured glass dining table:

• Knife and fork scratch test (Mohs hardness 7H) showed no visible damage.

• Red wine penetrant test (24h) has a clean recovery rate of 100%.

▍ Commercial freezer

Glass door of freezer in North American supermarket;

• The full mark of the condensed water peeling resistance test (ASTM D4585) at -25℃ passed.

• The average daily switching impact is 500 times, and the coating wear is less than ＜0.005mm in 3 years.

•  "Golden Triangle" of Equipment Collaboration —— Precision Surgery with Intelligent Production

▍Silkscreen Printers For Glass intelligent upgrade

Texture AI calibration system:

• Comparing natural rock samples in real time, the printing error is less than 0.03 mm.

• Automatic switching of 150-350 mesh Screen Printing Mesh (completed in 3 seconds)

Digital twin quality control:

• On-line 3D scanning texture depth (accuracy 1.5μ m)

• The recognition rate of micro-defects is 99.99% (> 0.02 mm).

▍ Evironmental protection and safety double certification

Cadmium with lead/cadmium without lead dual version:

• Lead-free version passed EN 71-3 children's toy safety standard.

• The color saturation of lead-containing plate is increased by 20% (metallic glaze effect)

100% water-based formula:

• VOC content < 5g/l (certified by ECOLABEL of EU)

• Biodegradation rate > 90% (OECD 301b)